Injection and Sampling Valves
Oliver Valves offer both sampling valves and injection valves. With our innovative designs, you'll easily be able to sample the process stream, and inject chemicals and other media into the process stream. With a variety of different nozzles, our sampling and injection valves can directly integrate into any new or existing Oil, Gas and Petrochemical project.
Sampling Valves Details:
Sampling the process stream can be accomplished with our valves, where a sample can be taken even at full system pressure directly from the process line. The product allows double isolation from process for safety. The orientation of the sample nozzle is fixed at the assembly stage and can be specified to suit the application.The flanged body drop forging is machined to ANSI B16.5 flange dimensions with the forged body section incorporating two isolation valves and one bleed valve.
A custom designed sampling probe extends from the flange connection into the process media for correct removal of the sample. If projections into the process line cannot be allowed the valve can be supplied without a probe. Sampling valves can be provided with either a single flange connection and screwed connection or double flange connections.
Injection Valves Details:
Injection of chemicals and other media onto the process stream can be accomplished easily with our injection valves. The valve inlet houses a one way check valve which opens for injection and goes normally closed to eliminate process fluid outflow. The orientation of the injection nozzle is fixed at the assembly stage and can be specified to suit the application. The flanged body forging is machined to ANSI B16.5 flange dimensions and incorporates two isolating valves and a bleed needle valve.
The injection probe extends from the flange connection into the centre of the process stream for the correct positioning of the injection media. Injection valves can be provided with either a single flange connection and screwed connection or double flange connections. The N Type double block and bleed with injection facility is also available.
3D Models are available upon request.
|Injection and Sampling Valves Specifications|
|Nozzle Types||Sampling, Injection and Injection Swirl Pattern|
|Flange Dimensions||ANSI B16.5 flange dimensions|
|Spindle||Anti-blow out spindle|
|Valve Features||Needle valve features non-rotating, anti-galling tip|
Nozzle Technical Information
This length is manufactured to suit customer requirements for the correct positioning of the injection orifice, up to a maximum length of 24". The position of the injection orifice can also be rotated at assembly to suit orientation relative to the valve handles.
The standard material is 316 stainless steel but other materials can be used to suit customer requirements.
The standard orifice is a 0.125" (3mm) diameter hole but other arrangements can be accommodated including swirl pattern spray nozzles to improve dispersion of the media.
This poppet type spring return valve has a Viton soft seat, and offers bore sizes of 10mm (CV2.0) or 12mm (CV4.6) or 16mm (CV7.2). Alternatively flange to flange styles of 6mm (CV2.0) max or 10mm (CV2.0) (maximum temperature 120 C) can be furnished. For Methanol injection specify Kalrez 'O' ring material for check valve seat.
Available in ASME B16.10 standard length (CSL) up to 10" full bore and 12" r...
Oliver Valvetek offer an extensive range of bespoke subsea gate valves that ...
Our Low Pressure Ball Valves are ideal for use in the Oil, Gas and Petrochem...
Our High Pressure Ball Valves are offered in three different configurations,...
Oliver Valves engineers and manufactures a range of Needle Valves and Manifo...